石墨烯负载的氧配位钴单原子稳定金属锂负极

Lithium (Li)-based batteries are the dominant energy source for consumer electronics, grid storage, and electrified transportation. However, the development of batteries based on graphite anodes is hindered by their limited energy density. With its ultrahigh theoretical capacity (3860 mAh∙g⁻¹), low redox potential (−3.04 V), and satisfactorily low density (0.54 g∙cm⁻³), Li metal is the most promising anode for next-generation high-energy-density batteries. Unfortunately, the limited cycling life and safety issues raised by dendrite growth, unstable solid electrolyte interphase, and "dead Li" have inhibited their practical use. An effective strategy is to develop a suitable lithiophilic matrix for regulating initial Li nucleation behavior and controlling subsequent Li growth. Herein, single-atom cobalt coordinated to oxygen sites on graphene (Co-O-G SA) is demonstrated as a Li plating substrate to efficiently regulate Li metal nucleation and growth. Owing to its dense and more uniform lithiophilic sites than single-atom cobalt coordinated to nitrogen sites on graphene (Co-N-G SA), high electronic conductivity, and high specific surface area (519 m²∙g⁻¹), Co-O-G SA could significantly reduce the local current density and promote the reversibility of Li plating and stripping. As a result, the Co-O-G SA based Li anodes exhibited a high Coulombic efficiency of 99.9% at a current density of 1 mA∙cm⁻² with a capacity of 1 mAh∙cm⁻², and excellent rate capability (high current density of 8 mA∙cm⁻²). Even at a high plating capacity of 6 mAh∙cm⁻², the Co-O-G SA electrode could stably cycle for an ultralong lifespan of 1300 h. In the symmetric battery, the Co-O-G SA based Li anode (Co-O-G SA/Li) possessed a stable voltage profile of 18 mV for 780 h at 1 mA∙cm⁻², and even at a high current density of 3 mA∙cm⁻², its overpotential maintained a small hysteresis of approximately 24 mV for > 550 h. Density functional theory calculations showed that the surface of Co-O-G SA had a stronger interaction with Li atoms with a larger binding energy, −3.1 eV, than that of Co-N-G SA (−2.5 eV), leading to a uniform distribution of metallic Li on the Co-O-G SA surface. More importantly, when matched with a sulfur cathode, the resulting Co-O-G SA/lithium sulfur full batteries exhibited a high capacity of 1002 mAh∙g⁻¹, improved kinetics with a small polarization of 191 mV, and an ultralow capacity decay rate of 0.036% per cycle for 1000 cycles at 0.5C (1C = 1675 mA∙g⁻¹) with a steady Coulombic efficiency of nearly 100%. Therefore, this work provides novel insights into the coordination environment of single atoms for the chemistry of Li metal anodes for high-energy-density batteries.     

A boundary expansion of solutions to nonlinear singular elliptic equations

In this paper we establish an asymptotic expansion near the boundary for solutions to the Dirichlet problem of elliptic equations with singularities near the boundary.This expansion formula shows the singularity profile of solutions at the boundary.We deal with both linear and nonlinear elliptic equations,including fully nonlinear elliptic equations and equations of Monge-Ampère type.     

Pressure controllable phase transition in MoTe2 by the interlayer band occupancy

High pressure can effectively control the phase transition of MoTe₂ in experiment, but the mechanism is still unclear. In this work, we show by first-principles calculations that the phase transition is suppressed and $1T^{\prime }$ phase becomes more stable under high pressure, which originates from the pressure-induced change of the interlayer band occupancies near the Fermi energy. Specifically, the interlayer states of $1T^{\prime }$ phase tend to be fully occupied under high pressure, while they keep partially occupied for the $T_d$ phase. The increase of the band occupancies makes the $1T^{\prime }$ phase more favorable in energy and prevents the structure changing from $1T^{\prime }$ to $T_d$ phase. Moreover, we also analyze the superconductivity under high pressure based on BCS theory by calculating the density of states and phonon spectra. Our results may shed some light on understanding the relationship between the interlayer band occupancy and crystal stability of MoTe₂ under high pressures.     

Effect of iron on mineral composition of quaternary phase clinker and its hydration properties

Journal of Thermal Analysis and Calorimetry - The present task is to investigate the influence of iron on the mineral composition and microstructure of the phase Q (C20A13M3S3, in the text below...     

Renormalization Group Analysis of Models of Advection of a Vector Admixture and a Tracer Field by a Compressible Turbulent Flow

Theoretical and Mathematical Physics - Using a quantum field theory renormalization group, we consider models of advection of a vector field and a tracer field by a compressible turbulent flow....     

The spectral analysis and exponential stability of a bi‐directional coupled wave‐ODE system

In this paper, an unstable linear time invariant (LTI) ODE system is stabilized exponentially by the PDE compensato—a wave equation with Kelvin‐Voigt (K‐V) damping. Direct feedback connections between the ODE system and wave equation are established: The velocity of the wave equation enters the ODE through the variable v_t(1,t); meanwhile, the output of the ODE is fluxed into the wave equation. It is found that the spectrum of the system operator is composed of two parts: point spectrum and continuous spectrum. The continuous spectrum consists of an isolated point , and there are two branches of asymptotic eigenvalues: the first branch approaches to , and the other branch tends to ?∞. It is shown that there is a sequence of generalized eigenfunctions, which forms a Riesz basis for the Hilbert state space. As a consequence, the spectrum‐determined growth condition and exponential stability of the system are concluded.     

Precise Synthesis of Poly(thioester)s with Diverse Structures by Copolymerization of Cyclic Thioanhydrides and Episulfides Mediated by Organic Ammonium Salts

The precise synthesis of poly(thioester)s with diverse structures is still a significant challenge in the polymeric materials field. Herein, we report a novel approach to the synthesis of well‐defined poly(thioester)s by the controlled alternating copolymerization of cyclic thioanhydrides and episulfides induced by simple organic ammonium salts. Both the cation and anion have strong effects on the copolymerization. [PPN]OAc ([PPN]=bis(triphenylphosphine)iminium) with a bulky cation was proven to be efficient in initiating this polymerization, yielding poly(thioester)s with a completely alternating structure, controlled molecular weight, and narrow polydispersity. The poly(thioester) obtained from succinic thioanhydride and propylene sulfide is a typical semicrystalline material, possessing a high refractive index of up to 1.78. Because it uses readily available monomers, this method is expected to open up a new route to poly(thioester)s with diverse structures and properties.     

Tuning the Reactivity of Cyclopropenes from Living Ring‐Opening Metathesis Polymerization (ROMP) to Single‐Addition and Alternating ROMP

Ring‐opening metathesis polymerization (ROMP) has become one of the most important living polymerizations. Cyclopropenes (CPEs) remain underexplored for ROMP. Described here is that the simple swap of 1‐methyl to 1‐phenyl on 1‐(benzoyloxymethyl)CPEs elicited strikingly different modes of reactivity, switching from living polymerization to either selective single‐addition or living alternating ROMP. The distinct reactivity stems from differences in steric repulsions at the Ru alkylidene after CPE ring opening. Possible olefin or oxygen chelation from ring‐opened CPE substituents was also observed to significantly affect the rate of propagation. These results demonstrate the versatility of CPEs as a new class of monomers for ROMP, provide mechanistic insights for designing new monomers with rare single‐addition reactivity, and generate a new functionalizable alternating copolymer scaffold with controlled molecular weight and low dispersity.     

保温层结构对感应加热制备太阳能级多晶硅影响的数值模拟研究

定向凝固技术是制备太阳能级多晶硅的主要制备技术.在该技术路线之中,优化多晶铸锭炉的热场结构和控制硅熔体的对流形态是获得高品质多晶硅的有效途径之一.本文设计了三种热场保温层,通过分析不同保温层下坩埚内硅熔体的热场、流场、固液界面、氧含量等的变化,确定了优化的保温层结构.研究发现,在传统固化碳毡保温层中引入石墨层可以使多晶炉内形成两个“热源”,提高多晶炉的热效率,使其能耗降低了38.5;;在洛伦兹力的作用下硅熔体中仅存在一个上下贯通的涡流,有利于硅中杂质原子的挥发.同时,添加石墨保温层后固液界面的形状由“W”状转变为凹状,其上的氧含量有所降低,并且V/Gn值在整个固液界面范围内均大于临界值,可以有效抑制氧沉淀.可见,在感应加热多晶硅生长系统中,采用固化碳毡+石墨保温层时,有利于降低多晶硅的生产成本并提高多晶硅的品质.